Flowmeter
calibration is an important part of your maintenance cycle.
By using Graftel's flow calibration labs, you are ensured
that you're calibration is performed and measured according
to NIST standards. Graftel performs two primary flow
meter calibration services; Liquid and Gas flow.
Flow meters do require calibrations from
time to time, usually on a yearly basis. Our labs have
calibrated hundreds of different types of flowmeters, and
since we started primarily in the Nuclear field, our lab
staff and accuracy of calibrations are hard to beat!.
Liquid
Flow - We utilize water as our primary medium for liquid
flow calibration. With simple correction factors, water can
represent many different fluidic properties. At this time we
do not calibrate with oil as a medium. For more information
about our liquid flow calibration, please click
here.
Gas
Flow - We utilize Air as our primary medium for air flow
calibration, however we also use Nitrogen, Helium, Argon and
other custom, non-explosive gases. To find out more about
our gas flow calibration,
click here.
If you
have a flowmeter that needs calibration, you might want to
consider our services, we have some of the lowest prices and
quickest turnaround times in the country. In addition, we
offer ISO 17025 Gas Flow Calibrations. For
more information about our ISO 17025 calibrations, please click
here.
All
calibrations are traceable to the National Institute of
Standards and Technology (NIST). If you have any further
questions, please feel free to email
us.
New additions to our
calibrations include: please click the link for more
information.
What
kind of Flowmeter calibration do you require? Click below to
find your solution! |
